真空干燥箱
特別提示：凡需充惰性氣體保護或干燥高溫度物品等特殊要求的用戶請與制造商聯系。定能滿足您的要求。
DZF型 真空干燥箱(Model DZF Vacuum Drying Oven)
一、適用范圍：
適用于工礦企業、醫學院校、科研單位在真空條件下對物品進行干燥熱處理等。
二、產品特點：
1、長方體工作室采用優質鋼板或不銹鋼板。鋼化、雙層玻璃門觀察工作室內物體一目了然。
2、箱門閉合松緊能調節，整體成型的硅橡膠門封圈，確保箱內高真空度。
3、微電腦智能控溫儀，具有設定，測定溫度雙數字顯示和PID自整定功能，控溫精確，可靠。
4、加熱功率比例可任意調節，確保低端控溫無溫度之弊。
一、Suitable Scope
It is applicable to such tests as drying heat treatment.ect.of artides under vacuum conditions in industrial and mining enterprises as well as in nedical colleges and scientific research institues.
二、Characteristies of product
1、 The working chamber is ，made of high quality sheet or corrosion-resistant stainless steel.Toughened hulletproof double glass door,to observe clearly the object in the working chamber.
2、 The air-tightness of the chamber door is adjustable,with a wholly shaped silicon rubber door sealing loop;so as to guarantee in-chamber high vacuum.
3、 Intelligent temperature controller is based microprocessor with PID parameters controlling function.Digital display of set and actual temperatures.High temperature controlling accuracy and reliability.
4、Be sure to the temperature is not excess.and the heat up power can be adjusted.
■采用平板式加熱器，均勻分布在工作室外壁。
※Adopting the platetype heater to evenly distribute to heat over the outer wall of the chamber. ■加熱器直接裝入工作室底部升溫快。
※The heater is installed directly at the bottom of the working chamber for quick temperature use.
三、技術參數 (Technical date):
型號Model DZF-6020 DZF-6021 DZF-6030 DZF-6050 DZF-6051 DZF-6090 DZF-6210
電源電壓Mains voltage 220V ,50Hz
控溫范圍Temperature control range RT+10℃～200℃ RT+10℃～150℃ RT+10℃～200℃ RT+10℃～250℃ RT+10℃～200℃ RT+10℃～250℃
消耗功率Consumption Power 300W 400W 1400W 1350W 1200W 2160W
溫度波動Temperature fluctuation ±1℃
真空度Vacuum degree <133pa
工作室尺寸Dimensions of the working chamber 300×300×275mm 320×320
×300mm 415×345×370mm 450×450
×450mm 560×590
×640mm
工作室材料 Material of working chamber 1Grl8Ni9Ti 08F 1Grl8Ni9Ti 1Grl8Ni9Ti 08F 1Grl8Ni9Ti
檢測認證人脈交流通訊錄
