進口高溫高壓疏水閥
進口高溫高壓疏水閥規格尺寸:10MM~25MM;
公稱壓力:PN160、PN320;
最低壓力:0.5MPA;
最大背壓率≤50%;
使用溫度:550℃;
連接方式:法蘭、對焊、承插焊;
閥體材質:鑄鋼、不銹鋼、鉻鉬鋼、鉻鉬釩鋼;
敏感件:不銹鋼;
適用介質:蒸汽,凝結水?
進口高溫高壓疏水閥簡述:
閥內部裝有自動吹除裝置。新型閥片、密封極為可靠。蒸汽裝置,高效節能。
可迅速排出設備起動時的空氣殛冷凝結水、排量大、漏汽率小。抗蝕性強.動作可靠,經久耐用。在工作壓力范圍內,無需調整,節能效果顯著。
Introduction of high temperature and high pressure steam trap:
Valve interior is equipped with automatic blowing device. New type valve, sealing is very reliable. Steam device, high efficiency and energy saving.
Can be rapidly discharged air and condensation at the start of the equipment. Water, large displacement, small rate of steam leakage. Strong resistance to corrosion, reliable, durable. In the working pressure range, without adjustment, energy saving effect is obvious.
進口高溫高壓疏水閥工作原理:
是利用熱動力學特性,當凝結水排到較低壓力區時會發生二次蒸發,并在粘度、密度等方面與蒸汽存在差異驅動啟閉件。
The thermokinetic characteristics. When the condensation of water into low pressure zone secondary evaporation will occur, and the viscosity, density, etc. and steam differences drive hoist pieces.
使用業績:
深圳地鐵1號線(羅寶線)Shenzhen metro line 1(luobao line)
深圳地鐵2號線(蛇口線)Shenzhen metro line 2 (shekou line)
深圳地鐵3號線(龍崗線)Shenzhen metro line 3 (longgang line)
深圳地鐵4號線(龍華線)Shenzhen metro line 4(longhua line)
深圳地鐵5號線(環中線)Shenzhen metro line 5(huanzhong line)